Electronics Mounts
Database-driven mounts for controller boards, motors, and fans.
Axial Fan Mount/Guard/Adapter
An axial fan mount, finger guard, or size-adapter plate for 40–140 mm PC/printer fans, sized to the standard 4-hole M4 pattern.
Controller Board/SBC Mount
Pick your exact board - BTT SKR, Octopus, Duet, Raspberry Pi, and 50 more - and the standoffs land on its real mounting holes. Mounts to DIN rail, VHB tape, or screws; self-tapping or heat-set fastening.
Power Supply Mount
Mounts an enclosed supply - Mean Well LRS-50 to RSP-500, the slim UHP-200 and UHP-350, and the LDO LCP300 - on its own bottom-hole pattern: snap onto DIN rail, bolt to 2020 extrusion, fit end brackets, or hang a UHP upright on a 1515 extrusion. Screw length is checked against the PSU depth limit.
Sabrent USB Hub Mount
Snap-in mount for a Sabrent HB-UMP3 USB hub, on a DIN rail, screwed to a panel, or stuck down with VHB tape.
UHP-200 Terminal Cover
Covers for the AC and DC terminal blocks of a Mean Well UHP-200 on a side mount. The DC cover sends the leads out the back or the side, and every cover comes in a mirrored version.