Compact Klipper DIN Bay Kit
SKR Pico + LRS-50 - a compact electronics bay kit for small printers, planned on the Micron 180 deck.
Specs
- Device
- BigTreeTech SKR Pico
- Device
- PSU - Mean Well LRS-50
About DIN Bay Kit - Layout Composer
Pick your boards and PSUs; get the complete printable DIN-rail bay: one clip-mount plate per device, packed into your rail length, previewed as the actual layout.
Open the full DIN Bay Kit - Layout Composer configurator →Pairs with (in the kit download)
Where a proven community part already exists, it travels in the download with its license and is credited here rather than re-generated.
- PCB DIN clip (pcb_din_clip_x3) by VoronDesign · GPL-3.0 original designFor board plates - measured 31.5 mm screw row. Print one per clip position (each plate lists 1-3).
- Din rail clip by Bryan (Printables) · CC0/Public Domain original designFor PSU plates - measured 46 mm screw row. Print one per clip position.
- BEEFY Din Clips by th0mpy (VoronUsers) · GPL-3.0Weight-classed variants for heavy loads - measure your variant's screw row first; the plate slots accept 29.5-48 mm centre-to-centre.
Built for an easy print
- Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
- Meshes are verified watertight before they ship.
- Mounting dimensions come from the hardware database; source confidence varies by device. Confirm your hardware revision and test the fit.
More on how these parts are made: the About page.
License and credits
License: CC BY-NC 4.0. Design by Partsmith.
Free for personal and non-commercial use. If you share it, credit Partsmith by BakedBean3D and link this page. Selling prints or any other commercial use requires a paid plan (see the Terms).
Related mounts
Print settings
Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.