Skip to content

Generic Electronics Enclosure

A project box sized to your own PCB and connectors: outer dimensions, wall/floor thickness, corner radius, optional 4-corner PCB standoffs, side/top ventilation, and cable cutouts. Lid is drop-in or four-corner screwed.

Loading configurator…

About this model

An electronics enclosure built to your own board and cable layout. Set the outer dimensions, wall and floor thickness, corner radius, PCB mounting standoffs, ventilation style, and lid type (drop-in locating rim or screwed). Exports a printable base + lid as STL, or a re-editable STEP.

Built for an easy print

  • Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
  • Meshes are verified watertight before they ship.

More on how these parts are made: the About page.

Key parameters

  • Width (X) (mm) - default 80
  • Depth (Y) (mm) - default 60
  • Height (Z) (mm) - default 35
  • Wall thickness (mm) - default 1.6
  • Floor thickness (mm) - default 1.6
  • Corner radius (mm) - default 3
  • Lid thickness (mm) - default 2
  • Lid - default Drop-in (locating rim)
  • Lid fit - default Lipped (recessed)
  • Lid screw - default M3

Print settings

Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.

License and credits

License: CC BY-NC 4.0. Design by Partsmith.

Free for personal and non-commercial use. If you share it, credit Partsmith by BakedBean3D and link this page. Selling prints or any other commercial use requires a paid plan (see the Terms).