Skip to content

Plan your electronics bay

Loading configurator…
About this kit, compatible clips and print guidance

About this model

The bay composer: select the exact electronics in your build - controller boards and power supplies straight from the hardware database - plus the rail length you have, and generate every mounting plate you need as one print-ready kit, arranged exactly as they will be mounted on your TS35 rails. Each plate carries the device's real hole pattern (heat-set standoffs for boards, safety-bounded counterbores for PSUs) and Partsmith's clip-slot interface for standard printable DIN clips - one to three clip positions per plate, scaled to its width, so a PSU-class plate never hangs on a single clip. Community-proven clips are linked with attribution below. Duplicate a selection to get two of it. Rails are ordinary bought TS35 stock; the layout tells you the lengths to cut.

Pairs with (in the kit download)

Where a proven community part already exists, it travels in the download with its license and is credited here rather than re-generated.

  • PCB DIN clip (pcb_din_clip_x3) by VoronDesign · GPL-3.0 original design
    For board plates - measured 31.5 mm screw row. Print one per clip position (each plate lists 1-3).
  • Din rail clip by Bryan (Printables) · CC0/Public Domain original design
    For PSU plates - measured 46 mm screw row. Print one per clip position.
  • BEEFY Din Clips by th0mpy (VoronUsers) · GPL-3.0
    Weight-classed variants for heavy loads - measure your variant's screw row first; the plate slots accept 29.5-48 mm centre-to-centre.

Built for an easy print

  • Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
  • Meshes are verified watertight before they ship.
  • Mounting dimensions come from the hardware database; source confidence varies by device. Confirm your hardware revision and test the fit.

More on how these parts are made: the About page.

Print settings

Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.

Supported devices (4)

Each configuration has its own page with recorded specifications and a link to the generator. Confirm your hardware revision before printing.

License and credits

License: CC BY-NC 4.0. Design by Partsmith.

Free for personal and non-commercial use. If you share it, credit Partsmith by BakedBean3D and link this page. Selling prints or any other commercial use requires a paid plan (see the Terms).