Loading…
Snap a cable or hose (3-25 mm) into this C-clip from the top - no threading required. Twist-locks tool-free into 2020-class T-slot extrusion, or screw-mounts to a flat surface.
A C-shaped cable clip you snap cables or hose into from the top, instead of threading them through a closed loop - add or remove a cable later without disassembling anything. The open throat is narrower than the cable so it grips on its own; an optional retaining lip adds two small snap nubs at the mouth for extra hold. Mounts tool-free with a twist-lock foot into 2020-class T-slot extrusion and up, or use the legacy screw tab for a flat wall or chassis surface. Prints flat on the bed with no supports. PETG or ABS recommended - the C-arms flex slightly during insertion.
More on how these parts are made: the About page.
Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.