Cable Management
Clips, saddles, and anchors for routing your wiring.
Cable Saddle Clip
An open-top cradle that saddles a single cable or bundle (3-25 mm) and screws down with an M3 screw - into a T-nut in an extrusion slot, or a nut in a panel.
Extrusion Cable Raceway
Open cable channel that screws to a 1515, 2020 or 3030 extrusion with two M3 slot nuts. Side exits, floor zip-tie tunnels and a snap-on lid; plain open walls also available. 40, 80 or 110 mm.
Structure-Mount Cable Clip (Snap-In C-Style)
Snap a cable or hose (3-25 mm) into this C-clip from the top - no threading required. Twist-locks tool-free into 2020-class T-slot extrusion, or screw-mounts to a flat surface.
WAGO Connector Bank
A labeled holder for a complete circuit of WAGO 221 lever connectors: 5V, 24V, 48V or 60V DC pairs, or AC L/N/G. For 3- or 5-port connectors, on adhesive tape or screwed to 1515, 2020 or 3030 extrusion.
Zip-tie Anchor
A zip-tie block that mounts to T-slot extrusion or a flat panel and keeps the screw and the tie on separate paths - the head is recessed, so it won't get in the way when you tighten the zip-tie.