Loading…
Covers for the AC and DC terminal blocks of a Mean Well UHP-200 on a side mount. The DC cover sends the leads out the back or the side, and every cover comes in a mirrored hand.
Covers the screw terminals at each end of a Mean Well UHP-200 mounted on its side. Pick the end: the AC cover, or a DC cover with the leads leaving out the back or out the side. Each comes in a standard and a mirrored hand. The download is already laid out to print with no supports: the AC cover on its angled wall, the DC covers on their closed end with the screw ears up. These are the covers installed on the Partsmith owner's own printer, published as drawn. A cover keeps fingers and loose tools off the terminals; it is not an electrical rating. Check your wiring before you power it.
More on how these parts are made: the About page.
Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.
Each configuration has its own page with recorded specifications and a link to the generator. Confirm your hardware revision before printing.
License: CC BY-NC 4.0. Design by Partsmith.
Free for personal and non-commercial use. If you share it, credit Partsmith by BakedBean3D and link this page. Selling prints or any other commercial use requires a paid plan (see the Terms).