Machine/Printer Foot
A round equipment foot with a positively captured mount - through-bolt, captured hex nut, or sandwich style - that clamps between the frame and a bolt head or nut, so the foot lifts with the machine.
Built for an easy print
- Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
- Meshes are verified watertight before they ship.
More on how these parts are made: the About page.
Key parameters
- Outer diameter (mm) - default 30
- Height (mm) - default 10
- Taper angle (°) - default 10
- Fastening - default Through-bolt, head captured at floor
- Screw size - default M3
- Material - default PETG
Print settings
Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.
More in Hardware Mounting
- Star Knob (Captured Nut) A hand-tightening star knob that captures a standard M2-M4 hex nut inside the grip - no tools, nothing glued in. Choose 4-7 finger lobes, 16-60 mm diameter, and an optional base flange for a cleaner seat.
License and credits
License: CC BY-NC 4.0. Design by Partsmith.
Free for personal and non-commercial use. If you share it, credit Partsmith by BakedBean3D and link this page. Selling prints or any other commercial use requires a paid plan (see the Terms).