L/N/G circuit (3-port WAGOs) - 3030 extrusion
Three-position line, neutral and ground circuit labels. With 3030 extrusion mounting.
Specs
- Connector ports
- 3
- Labels
- L, N, G
- Mounting
- 3030 extrusion
- Fastener
- M3
About WAGO Connector Bank
A labeled holder for a complete circuit of WAGO 221 lever connectors: 5V, 24V, 48V or 60V DC pairs, or AC L/N/G. For 3- or 5-port connectors, on adhesive tape or screwed to 1515, 2020 or 3030 extrusion.
Open the full WAGO Connector Bank configurator →Built for an easy print
- Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
- Meshes are verified watertight before they ship.
- Mounting dimensions come from the hardware database; source confidence varies by device. Confirm your hardware revision and test the fit.
More on how these parts are made: the About page.
License and credits
License: CC BY-SA 4.0. Design by Partsmith, adapted from Michael Olson (M).
Shared under its source designs' license, which applies to this model instead of Partsmith's non-commercial terms. The download includes ATTRIBUTION.txt with these credits.
Adapted from
- Wago 221-415 angled clip mount by Michael Olson (M), CC BY-SA 4.0
- Wago 221-413 angled clip mount by Michael Olson (M), CC BY-SA 4.0
Modified by Partsmith: the holder and its retention catches were reworked, and two or three holders are joined into one labeled circuit bank on a flat adhesive floor or M3 screw seats for 1515, 2020 or 3030 extrusion.
Related mounts
Print settings
Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.