LDO LCP300-24D5 Mount
Bolt-down mounting plate for the LDO LCP300-24D5 - flush M3 heat-set inserts at its own 4-slot end-plate ear pattern (the slim case has no tapped holes; screws drop through the ears into the plate), and a DIN clip-slot interface to snap onto a TS35 rail (or frame slots for a 2020 extrusion). Fits every LCP300 voltage variant (5/24V).
Specs
- Manufacturer
- LDO Motors
- Series
- LCP300
- Case size
- 120 x 95 x 35 mm
- Wattage
- 300 W
- Output voltages
- 5/24V
- Mounting screw
- M3
About Power Supply Mount
Mounts an enclosed supply - Mean Well LRS-50 to RSP-500, the slim UHP-350, and the LDO LCP300 - on its own bottom-hole pattern: snap onto DIN rail, bolt to 2020 extrusion, or fit end brackets. Screw length is checked against the PSU depth limit.
Open the full Power Supply Mount configurator →Pairs with (print separately)
Where a proven community part already exists, it is linked and credited here rather than re-generated.
- Din rail clip by Bryan (Printables) · CC0/Public DomainRecommended: the plate's default DIN clip-slots (plate_mount=din_slots) take this PSU-class clip straight on (measured 46 mm row) - no adapter. Print one per clip position (each plate lists 1-3).
- BEEFY Din Clips by th0mpy (VoronUsers) · GPL-3.0For heavy PSUs - measure your variant's screw row first; the plate slots accept 29.5-48 mm centre-to-centre. Bolts straight into the clip-slots, no adapter.
Built for an easy print
- Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
- Meshes are verified watertight before they ship.
- Mounting dimensions come from the hardware database; source confidence varies by device. Confirm your hardware revision and test the fit.
More on how these parts are made: the About page.
Related mounts
Print settings
Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.