Skip to content
Partsmith

48V DC pair (5-port WAGOs) - 1515 extrusion

Two-position 48V DC positive and negative circuit labels. With 1515 extrusion mounting.

Free
Generate this exact part

Specs

Connector ports
5
Labels
48V +, 48V -
Mounting
1515 extrusion
Fastener
M3

About WAGO Connector Bank

A labeled holder for a complete circuit of WAGO 221 lever connectors: 5V, 24V, 48V or 60V DC pairs, or AC L/N/G. For 3- or 5-port connectors, on adhesive tape or screwed to 1515, 2020 or 3030 extrusion.

Open the full WAGO Connector Bank configurator →

Built for an easy print

  • Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
  • Meshes are verified watertight before they ship.
  • Mounting dimensions come from the hardware database; source confidence varies by device. Confirm your hardware revision and test the fit.

More on how these parts are made: the About page.

License and credits

License: CC BY-SA 4.0. Design by Partsmith, adapted from Michael Olson (M).

Shared under its source designs' license, which applies to this model instead of Partsmith's non-commercial terms. The download includes ATTRIBUTION.txt with these credits.

Adapted from

Modified by Partsmith: the holder and its retention catches were reworked, and two or three holders are joined into one labeled circuit bank on a flat adhesive floor or M3 screw seats for 1515, 2020 or 3030 extrusion.

Related mounts

Print settings

Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.