Skip to content
Partsmith

TOBSUN EA50-5V Mount

Bolt-down mounting plate for the TOBSUN EA50-5V - flush M3 heat-set inserts at its own 4-slot end-plate ear pattern (the slim case has no tapped holes; screws drop through the ears into the plate), and a DIN clip-slot interface to snap onto a TS35 rail (or frame slots for a 2020 extrusion). Fits every EA50 voltage variant (5V).

Free
Generate this exact part

Specs

Manufacturer
TOBSUN
Series
EA50
Case size
53 x 50 x 20 mm
Wattage
50 W
Output voltages
5V
Mounting screw
M3

About Power Supply Mount

Mounts an enclosed supply - Mean Well LRS-50 to RSP-500, the slim UHP-200 and UHP-350, and the LDO LCP300 - on its own bottom-hole pattern: snap onto DIN rail, bolt to 2020 extrusion, fit end brackets, or hang a UHP upright on a 1515 extrusion. Screw length is checked against the PSU depth limit.

Open the full Power Supply Mount configurator →

Pairs with (in the kit download)

Where a proven community part already exists, it travels in the download with its license and is credited here rather than re-generated.

  • Din rail clip by Bryan (Printables) · CC0/Public Domain original design
    Recommended: the plate's default DIN clip-slots (plate_mount=din_slots) take this PSU-class clip straight on (measured 46 mm row) - no adapter. Print one per clip position (each plate lists 1-3).
  • BEEFY Din Clips by th0mpy (VoronUsers) · GPL-3.0
    For heavy PSUs - measure your variant's screw row first; the plate slots accept 29.5-48 mm centre-to-centre. Bolts straight into the clip-slots, no adapter.

Built for an easy print

  • Prints support-free in the orientation it downloads in - an automated gate checks every model on every change.
  • Meshes are verified watertight before they ship.
  • Mounting dimensions come from the hardware database; source confidence varies by device. Confirm your hardware revision and test the fit.

More on how these parts are made: the About page.

License and credits

License: CC BY-NC 4.0. Design by Partsmith.

Free for personal and non-commercial use. If you share it, credit Partsmith by BakedBean3D and link this page. Selling prints or any other commercial use requires a paid plan (see the Terms).

Related mounts

Print settings

Designed for FDM and exported at nominal size. Choosing a material changes the slicer advice we show - never the part's dimensions - so keep shrinkage compensation in your slicer's filament profile, where it's measured per spool. Clearance fits come from measured fastener and hardware tables. Snap and lipped parts assume a 0.4 mm nozzle; print 3+ perimeters for strength.